Rear brake cylinder

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4551
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Rear brake cylinder

Post by ROBBIE » Wed Jul 12, 2017 7:39 pm

I need 2 rear cylinders for the the LJ. Lower pistons were okish, but the top ones were rotted in place, so badly they had to be removed by pushing them out the other end. So my question is, where can I find a good pair? Other than Australia.
I can read the part number on one, but the other one is a bad casting and can't read the last two digits
Or will SJ ones fit?
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
ScottieJ
The Boss
The Boss
Posts: 11596
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Rear brake cylinder

Post by ScottieJ » Thu Jul 13, 2017 12:09 am

Fit the complete sj rear drum set up wit the auto adjusters. I have some you can have Robbie

Will compliment the front disc conversion nicely :thumbup:
Zuki Build

Steady as she goes!

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4551
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Rear brake cylinder

Post by ROBBIE » Thu Jul 13, 2017 10:01 am

ScottieJ wrote:Fit the complete sj rear drum set up wit the auto adjusters. I have some you can have Robbie

Will compliment the front disc conversion nicely :thumbup:
Think it's already been done then, auto adjusters already in there. That makes life a bit simpler
Cheers bud :doublethumbs:
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

Post Reply