The (not so) white one
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: The white one
A very sweet little SJ. Does it need a respray? Looks very good to me...
If it ticks over...leave it
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: The white one
Nice to see you cracking on with another machine - are you sure you have enough zuks yet?
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
Re: The white one
It's tidy, but I want it very tidydonkeychomp wrote:A very sweet little SJ. Does it need a respray? Looks very good to me...
Had a couple of hours today so got most of the rear floor welded up, ended up cutting out 2 300x40mm sections to remove most of the rust, mostly just doing the MOT welding at the moment, once it's on the road I'll pick away at all the little bits of rust that might be forming elsewhere
Re: The white one
I'm still jealous that you got this Scott! Maybe when it's up for sale next time I may have the cash!
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT
Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk
Re: The white one
Had a mate pop over this evening for a little patch of welding but managed to squeeze in a little bit of work on the sammy, mostly removing rust.
Yes there's a few areas that need attention but for a sammy its pretty good
Hopefully got a nice new black soft top coming for it as well
Yes there's a few areas that need attention but for a sammy its pretty good
Hopefully got a nice new black soft top coming for it as well
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: The white one
Usual rust spots and not too bad by the looks of it. I like this zook a lot.
If it ticks over...leave it
Re: The white one
Search for rust and you shall find it 
just goes to show how good they can look....until you remove the arch mounts 
Then I hit the inner arch with a wire wheel
So I got cutting, I left the brace in place to keep the outer panel in place. I've decided to do a semi virtual lift, just to make it easier to repair and to get rid of all the rust, the arch mounts will be remounted in the original position though, but with rivnuts so they can be removed/raised if you want to run 31s, will keep it looking standard but get rid of all the mud traps.
Also made a repair panel for the corner of the boot with 2mm as it no longer had the dimple for strength
All in all I'm doing more work than I wanted but at least it will be solid. If anyone is interested I'm going to have to sell it when it's MOT'd, should be finished in a few weeks.
just goes to show how good they can look....until you remove the arch mounts 
Then I hit the inner arch with a wire wheel
So I got cutting, I left the brace in place to keep the outer panel in place. I've decided to do a semi virtual lift, just to make it easier to repair and to get rid of all the rust, the arch mounts will be remounted in the original position though, but with rivnuts so they can be removed/raised if you want to run 31s, will keep it looking standard but get rid of all the mud traps.
Also made a repair panel for the corner of the boot with 2mm as it no longer had the dimple for strength
All in all I'm doing more work than I wanted but at least it will be solid. If anyone is interested I'm going to have to sell it when it's MOT'd, should be finished in a few weeks.
Re: The white one
Slowly getting there, it's had a few small patches on the inner sills and one arch is almost finished.
Ignore the random small plate at the rear, that's just tacked there to hold the panel in the correct position while I do the arch.
Removed the interior and went hunting..........
Found some!!
Kinda wish I didn't have to sell this one
has the potential to be a lovely little SJ.
Ignore the random small plate at the rear, that's just tacked there to hold the panel in the correct position while I do the arch.
Removed the interior and went hunting..........
Found some!!
Kinda wish I didn't have to sell this one
has the potential to be a lovely little SJ.-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: The white one
Lovely work!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
Re: The white one
More welding
mini VL finished on the passenger side and Body mount repaired
Then started work inside
One tiny hole that turned into a slightly larger one, I hate the way they have 3 layers of panels in places, always turns into a rust trap, but I'm replacing each layer anyway
mini VL finished on the passenger side and Body mount repaired
Then started work inside
One tiny hole that turned into a slightly larger one, I hate the way they have 3 layers of panels in places, always turns into a rust trap, but I'm replacing each layer anyway
