Good job.
I would have fired it up without the manifold for a good deathaning!
Dan
Twiss' Samurai 16v
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Twiss' Build/Breakages Thread!
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: Twiss' Build/Breakages Thread!
We diddan_2k_uk wrote:Good job.
I would have fired it up without the manifold for a good deathaning!
Dan
it was loud!-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Twiss' Build/Breakages Thread!
...dont forget flame-y and fire-y as well lol
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Twiss' Build/Breakages Thread!
New Update! Still can't get it fired up due to lack of exhaust manifold, but I have won it on ebay and apparently it's being posted tomorrow 
Yesterday I fitted the fan temp switch (ebay beauty) into the top hose
I have put the electric fan on it tonight, and just wired it up... although I'm going to fit a seperate relay for my fuel pump as well
I ordered the 14" fan and it's a bit big!!! Literally covers the whole radiator
Looking at it, it actually fits perfectly! There are flattened edges at the top and bottom of the fan cowling and they fit perfectly onto the SJ radiator lips
Yesterday I fitted the fan temp switch (ebay beauty) into the top hose
- 423608_10151345087635122_552780121_23600355_215985149_n.jpg (52.9 KiB) Viewed 9620 times
I ordered the 14" fan and it's a bit big!!! Literally covers the whole radiator
Looking at it, it actually fits perfectly! There are flattened edges at the top and bottom of the fan cowling and they fit perfectly onto the SJ radiator lips
- Attachments
-
- 418021_10151349399260122_552780121_23613240_1086643402_n.jpg (59.6 KiB) Viewed 9620 times
-
- 421921_10151349402075122_552780121_23613254_2022546121_n.jpg (60.09 KiB) Viewed 9620 times
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Twiss' Build/Breakages Thread!
nice,looking good
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Twiss' Build/Breakages Thread!
Got my nice shiny exhaust manifold gasket today!
Hopefully the manifold should appear at work tomorrow
Only cost me £9 quid inc vat, which is cheaper that the 8v gasket!
Hopefully the manifold should appear at work tomorrow
Only cost me £9 quid inc vat, which is cheaper that the 8v gasket!
- Attachments
-
- 429913_10151362771750122_552780121_23671487_726775429_n.jpg (49.85 KiB) Viewed 9578 times
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Twiss' Build/Breakages Thread!
Oh yeah should be uploading a first proper start video tomorrow 
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Twiss' Build/Breakages Thread!
Well, no startup video today!!!
I got the exhaust manifold in the post today. First random thing I've ordered at my new job so everyone was wondering that it was!
On my lunch break I had a proper look at it, and popped round to my mates house to offer it up to a selection of different downpipes/middle boxes.
Surprise surprise the 8v downpipe (standard sami one) doesnt fit.
The flange on the end of it is too small so it doesn't fit on the manifold with the weird wire gasket thing
Went into 6 different garages to find some scrap exhaust and all of the flanges are too small! Damn
Looks like I'm going to have to get a Vit downpipe!
Just got back in from work and test fitted it to the zook!
Here is it!
Looks good right? Thats what I thought until I took a closer look!
The end of the manifold the downpipe attaches onto is close to the chassis, very close.
No chance of getting a bolt in there!
So I have decided what I'm gonna do!
I'm going to chop the flange and a short length off my downpipe, and remove the wire gasket thing from the manifold.
Then I'm going to weld the flange bit onto the manifold, weld a flexy join onto that, and then weld the rest of the exhaust onto it!!!
Something like this....
Hope it works! haha
I got the exhaust manifold in the post today. First random thing I've ordered at my new job so everyone was wondering that it was!
On my lunch break I had a proper look at it, and popped round to my mates house to offer it up to a selection of different downpipes/middle boxes.
Surprise surprise the 8v downpipe (standard sami one) doesnt fit.
The flange on the end of it is too small so it doesn't fit on the manifold with the weird wire gasket thing
Went into 6 different garages to find some scrap exhaust and all of the flanges are too small! Damn
Looks like I'm going to have to get a Vit downpipe!
Just got back in from work and test fitted it to the zook!
Here is it!
- 395893_10151365604955122_552780121_23681469_891232995_n.jpg (44.4 KiB) Viewed 9563 times
- 429579_10151365606075122_552780121_23681472_1405491754_n.jpg (42.81 KiB) Viewed 9563 times
The end of the manifold the downpipe attaches onto is close to the chassis, very close.
No chance of getting a bolt in there!
- 429766_10151365608770122_552780121_23681489_606918315_n.jpg (59.65 KiB) Viewed 9563 times
- 423297_10151365607240122_552780121_23681484_682983831_n.jpg (58.33 KiB) Viewed 9563 times
I'm going to chop the flange and a short length off my downpipe, and remove the wire gasket thing from the manifold.
Then I'm going to weld the flange bit onto the manifold, weld a flexy join onto that, and then weld the rest of the exhaust onto it!!!
Something like this....
- zorst.jpg (14.26 KiB) Viewed 9563 times
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: Twiss' Build/Breakages Thread!
cant see why not, its what i would do.
Ian
Ian
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Re: Twiss' Build/Breakages Thread!
Can you cant the engine to the drivers side a little to give yourself a bit more room? I seem to remember when I put my mounts in I moved it across a bit to get the exhaust to fit.
Tim
Tim